Microsoft (R) Visual C++ Express Edition Version 9.0.30729.1.
Copyright (C) Microsoft Corp 2007. All rights reserved.
1>------ Build started: Project: zlib, Configuration: Release x64 ------

1>zlib : warning PRJ0009 : Build log could not be opened for writing.

1>Make sure that the file is not open by another process and is not write-protected.
2>------ Build started: Project: LibXml2, Configuration: Release x64 ------

2>LibXml2 : warning PRJ0009 : Build log could not be opened for writing.

2>Make sure that the file is not open by another process and is not write-protected.
1>Performing update step for 'zlib'
2>Performing update step for 'LibXml2'
1>Performing configure step for 'zlib'
1>loading initial cache file /.../CIP-Build/zlib-prefix/tmp/zlib-cache.cmake
1>-- Configuring done
2>Performing configure step for 'LibXml2'
1>-- Generating done
1>-- Build files have been written to: /.../CIP-Build/zlib-build
1>Performing build step for 'zlib'

2>bin.msvc\xmlcatalog.exe
2>bin.msvc\xmllint.exe
2>       19 file(s) copied.
2> copy bin.msvc\*.pdb C:\Projects\CIP-Build\LibXml2-install\bin
1>Build log was saved at "file://c:\Projects\CIP-Build\zlib.dir\Release\BuildLog.htm"
1>zlib - 0 error(s), 1 warning(s)
2>bin.msvc\*.pdb 
2>The system cannot find the file specified.
2>        0 file(s) copied.
3>------ Build started: Project: ITKv4, Configuration: Release x64 ------

3>ITKv4 : warning PRJ0009 : Build log could not be opened for writing.

3>Make sure that the file is not open by another process and is not write-protected.
3>Performing update step for 'ITKv4'
2>Completed 'LibXml2'
2>Build log was saved at "file://c:\Projects\CIP-Build\LibXml2.dir\Release\BuildLog.htm"
2>LibXml2 - 0 error(s), 1 warning(s)
3>Performing configure step for 'ITKv4'
3>loading initial cache file /.../CIP-Build/ITKv4-prefix/tmp/ITKv4-cache.cmake
4>------ Build started: Project: VTKv5, Configuration: Release x64 ------

4>VTKv5 : warning PRJ0009 : Build log could not be opened for writing.

4>Make sure that the file is not open by another process and is not write-protected.
4>Performing update step for 'VTKv5'
4>Performing configure step for 'VTKv5'
4>loading initial cache file /.../CIP-Build/VTKv5-prefix/tmp/VTKv5-cache.cmake
4>CMake Warning (dev) at Utilities/vtkhdf5/src/CMakeLists.txt:607 (ADD_CUSTOM_COMMAND):
4>  Policy CMP0040 is not set: The target in the TARGET signature of
4>  add_custom_command() must exist.  Run "cmake --help-policy CMP0040" for
4>  policy details.  Use the cmake_policy command to set the policy and
4>  suppress this warning.
4>  The target name

6>2>   Creating library C:\Projects\CIP-Build\SlicerExecutionModel-build\GenerateCLP\bin\Release\GenerateCLP.lib and object C:\Projects\CIP-Build\SlicerExecutionModel-build\GenerateCLP\bin\Release\GenerateCLP.exp
6>2>Embedding manifest...
6>2>Build log was saved at "file://c:\Projects\CIP-Build\SlicerExecutionModel-build\GenerateCLP\GenerateCLP.dir\Release\BuildLog.htm"
6>2>GenerateCLP - 0 error(s), 0 warning(s)
6>========== Build: 2 succeeded, 0 failed, 3 up-to-date, 0 skipped ==========
6>No install step for 'SlicerExecutionModel'
6>Completed 'SlicerExecutionModel'
6>Build log was saved at "file://c:\Projects\CIP-Build\SlicerExecutionModel.dir\Release\BuildLog.htm"
6>SlicerExecutionModel - 0 error(s), 0 warning(s)
7>------ Build started: Project: CIP, Configuration: Release x64 ------

7>CIP : warning PRJ0009 : Build log could not be opened for writing.

7>Make sure that the file is not open by another process and is not write-protected.
7>Performing configure step for 'CIP'
7>Not searching for unused variables given on the command line.
7>loading initial cache file /.../CIP-Build/CIP-prefix/tmp/CIP-cache.cmake
7>----------- ENTRY ------------
7>----------- PHASE 2 ------------
7>Configuring CIP...
7>----------- DONE ------------
7>-- Configuring SEM CLI module: ConvertDicom
7>-- Configuring SEM CLI module: MergeParticleDataSets

7>1>-- Configuring SEM CLI module: FitLobeSurfaceModelsToParticleData
7>1>-- Configuring done
7>1>-- Generating done
7>1>-- Build files have been written to: /.../CIP-Build/CIP-build
7>1>Build log was saved at "file://c:\Projects\CIP-Build\CIP-build\ZERO_CHECK.dir\Release\BuildLog.htm"
7>1>ZERO_CHECK - 0 error(s), 0 warning(s)
7>2>------ Build started: Project: CIP_PYTHON, Configuration: Release x64 ------
7>2>running build_ext
7>2>skipping '/.../CIP/cip_python\wrap_ChestConventions.cpp' Cython extension (up-to-date)
7>3>------ Build started: Project: RegisterCT2DLib, Configuration: Release x64 ------

7>3>RegisterCT2DLib : warning PRJ0009 : Build log could not be opened for writing.

7>3>Make sure that the file is not open by another process and is not write-protected.
7>3>RegisterCT2DLib - up-to-date
7>2>Build log was saved at "file://c:\Projects\CIP-Build\CIP-build\cip_python\CIP_PYTHON.dir\Release\BuildLog.htm"
7>2>CIP_PYTHON - 0 error(s), 0 warning(s)
7>4>------ Build started: Project: GetTransformationKappa2DLib, Configuration: Release x64 ------
7>5>------ Build started: Project: GetTransformationSimilarityMetric2DLib, Configuration: Release x64 ------
7>4>Compiling...

7>5>GetTransformationSimilarityMetric2DLib : warning PRJ0009 : Build log could not be opened for writing.

7>5>Make sure that the file is not open by another process and is not write-protected.
7>5>Creating library...
7>4>GetTransformationKappa2D.cxx
7>5>Build log was saved at "file://c:\Projects\CIP-Build\CIP-build\CommandLineTools\GetTransformationSimilarityMetric2D\GetTransformationSimilarityMetric2DLib.dir\Release\BuildLog.htm"
7>5>GetTransformationSimilarityMetric2DLib - 0 error(s), 1 warning(s)
7>6>------ Build started: Project: GetTransformationSimilarityMetric3DLib, Configuration: Release x64 ------

7>6>GetTransformationSimilarityMetric3DLib : warning PRJ0009 : Build log could not be opened for writing.

7>6>Make sure that the file is not open by another process and is not write-protected.
7>6>Creating library...
7>6>Build log was saved at "file://c:\Projects\CIP-Build\CIP-build\CommandLineTools\GetTransformationSimilarityMetric3D\GetTransformationSimilarityMetric3DLib.dir\Release\BuildLog.htm"
7>6>GetTransformationSimilarityMetric3DLib - 0 error(s), 1 warning(s)
7>4>Creating library...
7>7>------ Build started: Project: PerformMorphologicalTest, Configuration: Release x64 ------
7>7>Performing Pre-Link Event...
7>4>Build log was saved at "file://c:\Projects\CIP-Build\CIP-build\CommandLineTools\GetTransformationKappa2D\GetTransformationKappa2DLib.dir\Release\BuildLog.htm"
7>4>GetTransformationKappa2DLib - 0 error(s), 0 warning(s)
7>7>Linking...

7>127>itkCIPExtractChestLabelMapImageFilterTEST - 0 error(s), 0 warning(s)
7>128>------ Build started: Project: ComputeDistanceMap, Configuration: Release x64 ------
7>128>Linking...
7>128>   Creating library C:\Projects\CIP-Build\CIP-build\bin\Release\ComputeDistanceMap.lib and object C:\Projects\CIP-Build\CIP-build\bin\Release\ComputeDistanceMap.exp
7>128>Embedding manifest...
7>128>Build log was saved at "file://c:\Projects\CIP-Build\CIP-build\CommandLineTools\ComputeDistanceMap\ComputeDistanceMap.dir\Release\BuildLog.htm"
7>128>ComputeDistanceMap - 0 error(s), 0 warning(s)
7>129>------ Build started: Project: ComputeCrossSectionalAreaTest, Configuration: Release x64 ------
7>129>Performing Pre-Link Event...
7>130>------ Build started: Project: PerformMorphological, Configuration: Release x64 ------

7>130>PerformMorphological : warning PRJ0009 : Build log could not be opened for writing.

7>130>Make sure that the file is not open by another process and is not write-protected.
7>130>Embedding manifest...
7>130>mt.exe : general error c101008d: Failed to write the updated manifest to the resource of file "..\..\bin\Release\PerformMorphological.exe". The process cannot access the file because it is being used by another process.
7>129>Linking...
7>130>Build log was saved at "file://c:\Projects\CIP-Build\CIP-build\CommandLineTools\PerformMorphological\PerformMorphological.dir\Release\BuildLog.htm"
7>130>PerformMorphological - 1 error(s), 1 warning(s)
7>129>   Creating library C:\Projects\CIP-Build\lib\Release\ComputeCrossSectionalAreaTest.lib and object C:\Projects\CIP-Build\lib\Release\ComputeCrossSectionalAreaTest.exp
7>129>ComputeCrossSectionalAreaTest.obj : error LNK2019: unresolved external symbol __imp_ModuleEntryPoint referenced in function "void __cdecl RegisterTests(void)" (?RegisterTests@@YAXXZ)
7>129>ComputeCrossSectionalAreaTest.obj : error LNK2019: unresolved external symbol "__declspec(dllimport) void __cdecl itk::itkFactoryRegistration(void)" (__imp_?itkFactoryRegistration@itk@@YAXXZ) referenced in function main
7>129>C:\Projects\CIP-Build\CIP-build\CommandLineTools\Testing\bin\Release\ComputeCrossSectionalAreaTest.exe : fatal error LNK1120: 2 unresolved externals

7>129>Build log was saved at "file://c:\Projects\CIP-Build\CIP-build\CommandLineTools\ComputeCrossSectionalArea\ComputeCrossSectionalAreaTest.dir\Release\BuildLog.htm"
7>129>ComputeCrossSectionalAreaTest - 3 error(s), 0 warning(s)
7>131>------ Build started: Project: ClassifyFissureParticlesTest, Configuration: Release x64 ------
7>132>------ Build started: Project: itkCIPMergeChestLabelMapsImageFilterTEST, Configuration: Release x64 ------

7>131>ClassifyFissureParticlesTest : warning PRJ0009 : Build log could not be opened for writing.

7>131>Make sure that the file is not open by another process and is not write-protected.
7>131>Performing Pre-Link Event...
7>132>Performing Pre-Link Event...
7>131>Linking...
7>132>Linking...
7>131>LINK : fatal error LNK1104: cannot open file 'C:\Projects\CIP-Build\CIP-build\CommandLineTools\Testing\bin\Release\ClassifyFissureParticlesTest.exe'
7>131>Build log was saved at "file://c:\Projects\CIP-Build\CIP-build\CommandLineTools\ClassifyFissureParticles\ClassifyFissureParticlesTest.dir\Release\BuildLog.htm"
7>131>ClassifyFissureParticlesTest - 1 error(s), 1 warning(s)
7>132>   Creating library C:\Projects\CIP-Build\lib\Release\itkCIPMergeChestLabelMapsImageFilterTEST.lib and object C:\Projects\CIP-Build\lib\Release\itkCIPMergeChestLabelMapsImageFilterTEST.exp
7>132>Embedding manifest...